7 way to unclog a blocked drain


Unclogging a blocked drain isn’t something that you come throughout each day, however, it’s amongst the most famous plumbing troubles that each property proprietor in Australia and the complete world fears. The early symptoms of blocked drainage consist of gradual draining, foul smell, gurgling sounds, and overflowing. If no longer treated immediately, these minor problems will one day lead to a whole blockage.

Ways To Unclog A Blocked Drain

There are more than a few DIY recommendations for eliminating the threat of blocked drains and stopping them from reoccurring in the future. Here are seven useful tips:

1 Boiling Water

Pouring boiling water down the drain is likely the best way to clear its clog. However, by no means use this technique if your pipeline is PVC due to the fact the warmness should probably loosen their joints. Additionally, don’t use warm water on a porcelain sink as it can purpose cracks.

Using a giant kettle or boiling pot, warmness sufficient water and pour it down the drain directly. Repeat the pouring in two to three stages, spacing a few seconds between every pour.

2. Baking Soda And Vinegar

This handy homemade (DIY) technique includes pouring steaming warm water down your drain, accompanied by pouring half of a cup of baking soda. Allow the baking soda to sit down for some minutes earlier than including a cup of vinegar, then straight away seal the drain with a rag or steel stopper.

The response between the vinegar and baking soda is effervescent and must help in casting off grime, hair, or gunk in the pipe. Allow the combination to sit down for about 5 to 10 minutes earlier than flushing the drain once more with warm water.

3. The Bent Wire Hanger

This easy but positive DIY technique includes taking an everyday wire fabric hanger and straightening it up. Then, slightly bend it on one quit to create a hook. Insert that quit into the drainage, then begin pushing and pulling. You must be capable to fish out all nasty strong particles out of the drain with the use of this tool.

Remember, your purpose is to pull the blockage out and now not push it in addition to the drainage. After clearing up as a great deal as you can, flush the piping with warm water.

4. Handheld Or Full-Length Plunger

A cup-shaped plunger is one perfect way of clearing a kitchen faucet sink.

First, make certain to cowl any pipe that discharges overflowing water, and eliminate any stopper or plug overlaying your sink. Then, pour water into the drain till it’s 1/2 full, and cowl the drainage with the plunger for an association seal. Use up-and-down plunges to loosen and do away with the clog. While at it, test periodically to see if the water is flowing easily again.

5. Hand-Operated Drain Snake

The handheld drain snake is truly low-tech tools that you buy from the store, normally USD$10 at most. Basically, it’s lengthy spiral steel that can “snake” into the drain to shake and take away blockage particles. The metal graph enhances them to bend internal most pipes easily.

Unfortunately, the snake designs vary is confined and will work efficiently solely if the blockage is shut to the drain’s opening.

6. Caustic Chemical

Caustic soda can doubtlessly dissolve grease, food, hair, and different well-known blockages. Additionally, it can additionally dissolve different overseas substances and even tree roots. It’s made of sodium hydroxide and can end result in extreme chemical burns if no longer treated cautiously. Therefore, whilst buying it from the store, be aware additionally to get full protecting gear.

Add ¾ gallon of bloodless water into a bucket and combine with three cups of caustic cleaner. Stir properly with a dry timber spoon. Then, pour it into the clogged pipe, go away for 30 minutes, and then flush it with boiling water. If necessary, repeat the process.

7. Clean The P-Trap

In case you have a sink with a blocked drain, the hassle ought to be lurking inside the U-shaped piece beneath known as the P-trap. Fortunately, it’s easy-peasy to smooth with the aid of hand. First, area an empty container or mop bucket below the entice pipe to accumulate waste or water that may also spill. Then, cast off the P-trap by unscrewing the two connecting nuts at each end. Turn it inversely, and empty the amassed contents into the bucket.

Make certain it’s easy and free of any particles earlier than inserting it again in place. In most scenarios, this method needs to work perfectly.


The hints mentioned above are speedy and simple DIY techniques that should assist you to work your way out of the most frequent problematical clogs. However, if these methods don’t work for you, you’ll have to contract a dependent plumbing agency to cope with the blockage. Nevertheless, the easy each day preservation of your plumbing machine will forestall any excessive instances in the future. Thus, make positive to test for minor clogging from time to time.

Leave a reply

Please enter your comment!
Please enter your name here